Fico AMS-W Top Foil
The Fico AMS-W for top foil is an automatic molding system for single sided MAP products like BGA, QFN and BOC. The unique top foil feature on this machine allows bleed free production of bare die products. A special foil, guided over the top mold creates a soft sealing layer between mold and products. As a result, the die stays clear of compound. The use of top foil eliminates an extra cleaning process step after molding.
- Top edge molding
- 45 tons press station
- Cavity vacuum control
- Board vacuum
- Dynamic clamping control
- Transfer pressure control
- Dynamic temperature control
- Easy mold exchange
- Compound reduction
- Small footprint (up to 50% smaller)
| Machine dimensions | |
|---|---|
| Width Depth Height Weight |
2273 mm 1490 mm 1976 mm approx. 2600 kg |
| Leadframe dimensions | |
|---|---|
| Min width and length Max width and length Thickness Max height |
180 x 45 mm 280 x 78 mm 0.1 - 1.5 mm 2 mm |
| Supply requirements | |
|---|---|
| Voltage Frequency Power rating Compressed air Average air consumption Factory exhaust |
208-230-380-400-440-460-480VAC - 3~ 50 / 60 Hz 9 kVA 5 - 10 bar 6 m3/h at 6 bar 300 m3/h at 50Hz |
| Cassette dimensions | |
|---|---|
| Width Length Height Storage capacity |
48 - 85 mm 180 - 300 mm 100 - 165 mm 400 mm |
| Equipment performance | |
|---|---|
| Uptime MTBF MTBA MTTR MTTA |
≥ 98% ≥ 200 h for every MTTR of 1 h ≥ 3 h ≤ 1 h ≤ 3 min |
| Press & mold properties | |
|---|---|
| Max clamp force Max mold opening Pellet diameter Max pellet length Max number of plungers Max cavity temperature difference |
450 kN 90 mm 11, 14 or 14.3 mm 45 mm 10 ±2ºC |
- Side rail vacuum
- V-pin mold
- High end vacuum
- Also available as manual machine
For additional details please contact your sales team